|View single post by Mike Smith|
|Posted: 26 April 2017 05:30 pm||
|The trick here was to install the radio without too much addition in weight.
A simple ply plate was put in across the fus' and the servo mounted upside down and fitted to operate a closed loop for the rudder.
I let in some 1/8th sheet balsa to strenghten the fus' at this point and cut out a hatch to allow access. Battery will velcro to the baulkhead. The arial is inside the paper tube to stop it flapping in the breeze
Attachment: Radio installation.jpg (Downloaded 436 times)
Last edited on 26 April 2017 05:32 pm by Mike Smith
I use "The Force"