Medway Model Flying Club Forum For All Enthusiasts Home 

Due to spammers users can only register manually. email alistair.clinton@icloud.com with your full name to register for the forum. A user name and password will be emailed to you.


Deluxe Materials Wing Joining Kit
 Moderated by: colin, admin, AdeH
New Topic Reply Printer Friendly
 Rate Topic 
AuthorPost
 Posted: 5 July 2021 06:37 pm
  PMQuoteReply
1st Post
PeterDavey

 

Joined: 14 April 2021
Location:  
Posts: 15
Status: 
Offline
Mana: 
Hi everyone,
Apologies if this is in the wrong place but I have a little dilemma. I am in the middle of building an Ugly Stik and have decided to add a wing bandage for a little more strength. I used a Deluxe Materials Wing joining kit purchased through Amazon (I needed next day delivery and had access to prime). I put the bandage on and applied the resin as per the instructions about 24hours ago. The resin is still tacky in most places and transfers to fingers in others. The ratios can’t be wrong as the entire contents of both pots were added and stirred thoroughly. What’s left in the pot is still runny in places and cured in others. The problem is I think it’s to far gone to remove without severe balsa damage. The temperature is well up so can’t be that causing the issue. Does anyone have any advice or hacks to save the wing? Perhaps applying some heat to help the cure? Have I missed something obvious or do I have out of date epoxy?

Back To Top

 Posted: 6 July 2021 03:34 pm
  PMQuoteReply
2nd Post
MikeY



Joined: 9 February 2007
Location:  
Posts: 43
Status: 
Offline
Mana: 
Hi Peter,
Apart from waiting a few more days you might like to watch this video :-https://www.youtube.com/watch?v=2dwZbltWIRo

Mike

Back To Top

 Posted: 9 July 2021 01:10 pm
  PMQuoteReply
3rd Post
PeterDavey

 

Joined: 14 April 2021
Location:  
Posts: 15
Status: 
Offline
Mana: 
Thanks for the reply Mike, I have left the wing in the loft room for the last few days which is unbearably warm at the moment and it does seem to be curing, just incredibly slowly! so just a question of patience on this one i guess >:o 

Back To Top

 Posted: 10 July 2021 06:02 pm
  PMQuoteReply
4th Post
MikeY



Joined: 9 February 2007
Location:  
Posts: 43
Status: 
Offline
Mana: 
Hi Peter,

Glad it's curing, strange duluxe materials are usually very good, maybe some old shop stock? as you said above.

Mike

Back To Top

 Posted: 13 July 2021 09:27 am
  PMQuoteReply
5th Post
Phil F
MMFC Committee Member


Joined: 15 April 2010
Location: Sittingbourne Pothole Capital Of World
Posts: 1164
Status: 
Offline
Mana: 
Yes very strange foe DeLuxe . Usually set within a few hours. As mike says it might be old stock?

I have in the past used 30 min epoxy thinned with some meths/methanol  if there is any foam nearby or cellulose thinners  if its being used on wood .
Be careful not to add to much thinners or meths 



____________________
The secret of flight is to aim at the ground and miss
Back To Top


 Current time is 11:56 pm

Top



UltraBB 1.172 Copyright © 2007-2013 Data 1 Systems
Page processed in 0.1728 seconds (8% database + 92% PHP). 26 queries executed.